If you possess a cleaning company, you know how important preserving your vacuum cleaner fleet can be. Correctly taken care of vacuum cleaners could conserve beneficial time and labor although keeping your clients floors looking great. Maintaining your vacuum cleaner suction system away from debris and obstacles could improve the life of your vacuums motors in turn saving you cash on internal parts and labor. A simple monthly inspection can save you time and money while increasing your vacuum cleaners efficiency.
The very first thing to inspect on your vacuum cleaner may be the cord. Check for just about any cracks or kinks in the cord and make certain the cord connection towards the vacuum is tightly secured into the vacuums’ body. A cracked or twisted cord can be an electrical hazard for your cleaning crew and individuals close to the work area. When the cord is cracked and bare wire is exposed replace the cord immediately.
The next area to verify on the vacuum cleaner is the filtration program. On a filter bag system, check for any blockages about the incoming suction tube and also the exhaust port. If your vacuum has any internal filters verify for filter blockage and replace or clean them if they’re dirty. Some vacuum cleaners have clips that old the filter bag in place, check to see if clips are cracked or bent and if so replace them immediately. When the filter bag isn’t sealed on the intake port, debris could get into the vacuums’ motor and impede the performance from the vacuum cleaner.
If every thing checks out within the filter compartment then its time to move towards the underside of the vacuum cleaner. Lay the vacuum cleaner on the ground and roll it over to expose the beater bar and suction region of the vacuum. Make sure the intake suction tube is not blocked by debris that can cause a strain on the vacuum belt and prematurely burn out the motor. Verify the beater bar for just about any cotton or fibers that might be wrapped close to it. If material is wound around the beater bar, cut it off carefully using a pair of scissors while being careful not to cut the beater bar bristles. Spin the beater bar and listen for squeaks or grinding in the beater bar bearings. The beater bar ought to roll smoothly with light resistance from the belt. If the beater bar does not roll smoothly, have a vacuum technician inspectit and and if needed, replace the bearings.
The final part of the inspection procedure is a quick look over the outer shell of the vacuum cleaner. Verify for cracks or protruding parts and then roll the vacuum to determine if it moves smoothly. If every thing checks out then it ought to be great for another month of great service. On higher priced vacuum cleaners repair expenses can amount to up to 500 dollars. A regular vacuum inspection can keep these expenses down and your cleaning business running smoother.
If you want more information on Lightweight Vacuum Cleaners, don’t read just rehashed articles online to avoid getting ripped off.
Go here: Lightweight Upright Vacuum Cleaner